menuMENU    UK Free TV logo Freeview

 

 

Click to see updates

Full Freeview on the Whitehawk Hill (Brighton and Hove, England) transmitter

first published this on - UK Free TV
sa_streetviewGoogle Streetviewsa_gmapsGoogle mapsa_bingBing mapsa_gearthGoogle Earthsa_gps50.825,-0.113 or 50°49'29"N 0°6'47"Wsa_postcodeBN2 5EL

 

The symbol shows the location of the Whitehawk Hill (Brighton and Hove, England) transmitter which serves 96,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.

This transmitter has no current reported problems

The BBC and Digital UK report there are no faults or engineering work on the Whitehawk Hill (Brighton and Hove, England) transmitter.

Choose from three options: ■ List by multiplex ■ List by channel number ■ List by channel name
_______

Which Freeview channels does the Whitehawk Hill transmitter broadcast?

If you have any kind of Freeview fault, follow this Freeview reset procedure first.

Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.

MuxH/VFrequencyHeightModeWatts
PSB1
BBCA
 V max
C48- (689.8MHz)171mDTG-34,000W
Channel icons
1 BBC One (SD) South East, 2 BBC Two England, 9 BBC Four, 23 BBC Three, 201 CBBC, 202 CBeebies, 231 BBC News, 232 BBC Parliament, 250 BBC Red Button, plus 15 others

PSB2
D3+4
 V max
C35 (586.0MHz)171mDTG-34,000W
Channel icons
3 ITV 1 (SD) (Meridian (South Coast micro region)), 4 Channel 4 (SD) South ads, 5 Channel 5, 6 ITV 2, 10 ITV3, 13 E4, 14 Film4, 15 Channel 4 +1 South ads, 18 More4, 26 ITV4, 30 E4 +1, 35 ITV1 +1 (Meridian south coast),

PSB3
BBCB
 V max
C36 (594.0MHz)171mDTG-64,000W
Channel icons
56 5SELECT, 101 BBC One HD (England no regional news), 102 BBC Two HD (England), 103 ITV 1 HD (ITV Meridian Southampton), 104 Channel 4 HD South ads, 105 Channel 5 HD, 106 BBC Four HD, 109 BBC Three HD, 204 CBBC HD, 205 CBeebies HD, plus 1 others

COM4
SDN
 V max
C33 (570.0MHz)164mDTG-84,000W
Channel icons
12 Quest, 20 Drama, 21 5USA, 29 ITV2 +1, 32 5STAR, 33 5Action, 41 Legend, 42 GREAT! movies action, 46 Channel 5 +1, 58 ITVBe +1, 59 ITV3 +1, 64 Blaze, 67 CBS Reality, 74 Dave ja vu, 78 TCC, 81 Blaze +1, 89 ITV4 +1, 203 CITV, 208 POP MAX, 209 Ketchup TV, 210 Ketchup Too, 211 YAAAS!, plus 15 others

COM5
ArqA
 V max
C57 (762.0MHz)171mDTG-84,000W
Channel icons
11 Sky Arts, 17 Really, 19 Dave, 31 E4 Extra, 36 pick, 40 Quest Red, 43 Food Network, 47 Film4 +1, 48 Challenge, 49 4seven, 57 Smithsonian Channel, 60 Drama +1, 70 Quest +1, 75 Yesterday +1, 83 Together TV, 233 Sky News, plus 8 others

COM6
ArqB
 V max
C32 (562.0MHz)171mDTG-84,000W
Channel icons
 FreeSports, 25 W, 27 Yesterday, 34 GREAT! movies, 39 DMAX, 44 HGTV, 71 Quest Red +1, 73 HobbyMaker, 82 Talking Pictures TV, 84 PBS America, 88 Classic Hits, 235 Aljazeera English, plus 19 others

LBN
 V -10dB
C40 (626.0MHz)171mDTG-12400W
Channel icons
from 8th July 2014: 7 Latest TV,

DTG-3 64QAM 8K 2/3 24.1Mb/s DVB-T MPEG2
DTG-6 256QAM 32KE 2/3 40.2Mb/s DVB-T2 MPEG4
DTG-8 64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)

Are you trying to watch these 0 Freeview HD channels?


The Whitehawk Hill (Brighton and Hove, England) mast is not one of the extended Freeview HD (COM7 and COM8) transmitters, it does not provide these high definition (HD) channels: .

If you want to watch these HD channels, either use Freesat HD, or move your TV aerial must point to one of the 30 Full Freeview HD transmitters. For more information see the want to know which transmitters will carry extra Freeview HD? page.

Which BBC and ITV regional news can I watch from the Whitehawk Hill transmitter?

regional news image
BBC South East Today 0.8m homes 3.2%
from Tunbridge Wells TN1 1QQ, 43km northeast (36°)
to BBC South East region - 45 masts.
regional news image
ITV Meridian News 0.9m homes 3.6%
from Whiteley PO15 7AD, 80km west (274°)
to ITV Meridian (South Coast) region - 39 masts.
All of lunch, weekend and 50% evening news is shared with all of Meridian plus Oxford

How will the Whitehawk Hill (Brighton and Hove, England) transmission frequencies change over time?

1950s-80s1984-971997-981998-20122012-1316 Oct 2019
VHFC/D EEEC/D E TW T
C2BBCtvwaves
C34ArqA
C35C5wavesC5wavesD3+4
C36BBCB
C40_local
C48ArqBArqB
C51tv_offBBCB
C53tv_offC4wavesC4wavesC4wavesD3+4
C54tv_offLBN
C56tv_offArqA
C57tv_offBBC1wavesBBC1wavesBBC1wavesSDNSDN
C60tv_offITVwavesITVwavesITVwaves-BBCABBCA
C63BBC2wavesBBC2wavesBBC2waves

tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 7 Mar 12 and 21 Mar 12.

How do the old analogue and currrent digital signal levels compare?

Analogue 1-4 10kW
Analogue 5(-3dB) 5kW
SDN, ARQA, ARQB, BBCA, D3+4, BBCB(-4dB) 4kW
Mux B*(-10dB) 1000W
Mux 2*, Mux C*, Mux D*, LBN(-14dB) 400W
Mux 1*, Mux A*(-17dB) 200W

Which companies have run the Channel 3 services in the Whitehawk Hill transmitter area

Aug 1958-Jan 1992Southern Television
Jan 1982-Dec 1992Television South (TVS)
Jan 1993-Feb 2004Meridian
Feb 2004-Dec 2014ITV plc
Feb 1983-Dec 1992TV-am•
Jan 1993-Sep 2010GMTV•
Sep 2010-Dec 2014ITV Daybreak•
• Breakfast ◊ Weekends ♦ Friday night and weekends † Weekdays only. Whitehawk Hill was not an original Channel 3 VHF 405-line mast: the historical information shown is the details of the company responsible for the transmitter when it began transmitting Channel 3.

Comments
Wednesday, 28 March 2012
Simon
6:19 PM
Brighton

This is all really helpful. I'm very grateful for all the responses.

I don't think it's interference since it never appeared pre-DSO on any channel but now appears constantly on all channels.

I'm fairly certain I can rule out cable and satellite - we don't have either in the block. But it is possible that some flats may be using internal aerials, not the shared aerial.

We live at ground level tucked away behind quite a lot of concrete so I'm doubtful that an internal aerial would work for us, but if all else fails I will try this!

The flats affected and unaffected are distributed throughout the height of the building.

I've arranged to try my TV in one of the unaffected flats tonight.

And failing that I've booked a professional installer to come round and advise.

I'll let you all know how I get on!

Thanks again.

link to this comment
Simon's 13 posts GB
J
jb38
sentiment_very_satisfiedPlatinum

8:06 PM

Jim: Just as a small addition, the point I was really getting at is, that anyone who resides as close as 1 mile or so from a 4Kw transmitter would virtually have to be located in a cellar not to be able to obtain some form of reception on their TV or box using a piece of wire as short as 8" or so pushed into the aerial socket, (middle of!) then the device re-tuned with this installed.

However, it will be interesting to hear the outcome of the installers visit.

link to this comment
jb38's 7,179 posts GB
Simon
9:10 PM
Brighton

Just to feedback on progress so far:

I took my TV round to my neighbours flat this evening and plugged it into the same aerial outlet that he has been using successfully since DSO.

My TV worked fine!

However I also tried a secondard aerial outlet in his flat (in a different part of his flat and not normally used) and my TV displayed the same picture and sound breakup that I suffer in my own flat.

So my working theory is that the signal from the common aerial on top of the block might be split and sent via more than one distribution amplifiers around the building. At least one distribution amplifier is being saturated by the strong signal and then transmits a distorted (though strong) signal onwards around the flat. The amplifier in question may then only serve certain outlets in certain flats.

Problem is, for most people (including the managing agents) this sort of stuff seems like rocket science.


Jim: off to try sticking an 8" length of copper wire into the middle of the aerial input socket on my TV to determine whether my well-shielded ground floor flat counts as a virtual cellar or not!


Thanks again for all the replies. You are keeping me sane!

link to this comment
Simon's 13 posts GB
J
jb38
sentiment_very_satisfiedPlatinum

9:51 PM

Simon: Another little point to consider based on what you have now found out, being that if it transpires that your flat is indeed fed from a twin distribution system, then going back to the issue of you having mentioned that the variable booster made the situation worse automatically means that you have to now have to consider that the possible reason for this was because that actual distribution amplifier was suffering from an element of input overloading instability resulting in it distributing a low quality signal, this being why no amount of reducing by you would clear it as its not you its overloading. Not saying that is is though, but its something to consider.

I haven't actually seen you mention it yet, but in situations like this you should always carry out frequent signal strength / quality checks so that you know what is happening, especially to the most important element of the signal, its quality!





link to this comment
jb38's 7,179 posts GB
Friday, 30 March 2012
Simon
6:35 PM
Brighton

I owe you an update! In brief:

- installers came and measured the signal from the aerial outlet socket in my flat; it is strong but the signal to noise ratio is low - I don't the exact stats.

- apparently the distribution ampliefier is "old" and the cabling throughout the buidling is a "tapped" system - i.e. one cable runs throughout the building and has branches to each flat, rather than individual cables to each flat.

So I conclude that it is the distribution amplifier being overloaded by the strong freeview signal. They're going to look at replacing the amplifier.

In the meantime, I decided I would put the "8 inches of copper wire" claim to the test. And sure as you know, 8 inches of copper wire gives me a beautiful signal - despite the several meters of concrete between the TV and the outside world.

Now I'm worried what the 4kW from Whitehawk Hill is doing to my brain!

link to this comment
Simon's 13 posts GB
J
jb38
sentiment_very_satisfiedPlatinum

8:50 PM

Simon: Thanks for this latest update and with the content of being very informative, insomuch that it somewhat confirms that the signal being fed into your flat is indeed of low quality hence the comment made about the signal to noise ratio, and why no amount of you reducing the signal helped the situation.

Regarding the copper wire test, this might have seemed on the face of it as being a bit amateurish, but RF signals of a non-microwave nature have up to a point a mind of their own and do not act in the same way as some of these matter of fact black and white statements sometimes seen made about them would suggest, as well as the fact that they act differently again in situations where lower frequency ranges are involved, this being why its so difficult to predict exactly what they will do, but though with you being so close to the 4 Kw transmitting station such as your are I knew through years of experience in the field of RF engineering that it would be difficult to stop a signal from reaching you except if you were located in something like a Faraday cage, such as is used for testing emergency radio beacons without them being picked by monitoring equipment, the cellar purely referred to for simplicity.

Anyway maybe you could further update on the progress of, or otherwise, regarding the distribution amp.

link to this comment
jb38's 7,179 posts GB
Saturday, 31 March 2012
R
Richard Davis
sentiment_satisfiedBronze

11:04 AM

Simon: Glad to hear that you've made progress with your problem. Don't worry about the 4kW of digital (or a total of 24kW if you add all the six multiplexes together)- the old analogue service had four channels of 10kW plus one of 5kW (Ch 5), giving a total of 45kW, so you're being subjected to less RF energy now than you were before!

link to this comment
Richard Davis's 26 posts GB
Monday, 2 April 2012
A
A
12:48 PM
Brighton

What does ArqB mean? I know that it is COM6.

The transmission power is 4000W. Is this constant or does it drop, say in the early hours of the morning?

Thanks

link to this comment
A's 19 posts GB
Dave Lindsay
sentiment_very_satisfiedPlatinum

1:23 PM

A: "ArqB" is an abbreviation for "Arqiva B" which is the name of COM6 multiplex. Arqiva is the name of the company that owns and runs all of the transmitters. It has two multiplexes, hence the A and B suffixes.

For a full list of services by multiplex, see DMOL Post-DSO Multiplex Channel Allocations


The transmission power does not vary by time. The days of God Save the Queen being played and then the transmitter being taken off of the air are gone.

link to this comment
Dave Lindsay's 5,724 posts GB
Thursday, 5 April 2012
G
geoff
11:42 AM

Note the FECs listed for COM4 and COM5 at the top of the page appear to differ from reality.
I can't tune these multiplexes with FEC 2/3, I can with 3/4.

I'm 2.4Km WNW of Whitehawk Hill with clear line of sight using a portable aerial, so it seems likely I'm getting the right transmitter.

Linux users may find the following useful for the scan utility from dvb-apps.

user@machine:~$ cat /usr/share/dvb/dvb-t/uk-WhitehawkHill-post-DSO
# UK, Whitehawk Hill
# Hand-edited 20120405 g77
# T freq bw fec_hi fec_lo mod transmission-mode guard-interval hierarchy
# PSB1
T 785800000 8MHz 2/3 NONE QAM64 8k 1/32 NONE
# PSB2
T 730000000 8MHz 2/3 NONE QAM64 8k 1/32 NONE
# PSB3 (HD untested)
# T 714000000 8MHz 2/3 NONE QAM256 8k 1/32 NONE
# COM4 note FEC 3/4
T 762000000 8MHz 3/4 NONE QAM64 8k 1/32 NONE
# COM5 note FEC 3/4
T 754000000 8MHz 3/4 NONE QAM64 8k 1/32 NONE
# COM6
T 690000000 8MHz 3/4 NONE QAM64 8k 1/32 NONE

link to this comment
geoff's 4 posts GB
Select more comments

Your comment please
Please post a question, answer or commentIf you have Freeview reception problems before posting a question your must first do this Freeview reset procedure then see: Freeview reception has changed, Single frequency interference, and Freeview intermittent interference.

If you have no satellite signal, see Sky Digibox says 'No Signal' or 'Technical fault'

If you have other problems, please provide a full (not partial) postcode (or preferably enter it in box at the top right) and indicate where if aerial is on the roof, in the loft or elsewhere.

UK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.








Privacy policy: UK Free Privacy policy.