Full Freeview on the Waltham (Leicestershire, England) transmitter
Google Streetview | Google map | Bing map | Google Earth | 52.801,-0.801 or 52°48'4"N 0°48'5"W | LE14 4AJ |
The symbol shows the location of the Waltham (Leicestershire, England) transmitter which serves 770,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
_______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Waltham transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Waltham transmitter?

BBC East Midlands Today 0.9m homes 3.4%
from Nottingham NG2 4UU, 28km northwest (305°)
to BBC East Midlands region - 17 masts.

ITV Central News 0.9m homes 3.4%
from Birmingham B1 2JT, 83km west-southwest (244°)
to ITV Central (East) region - 17 masts.
All of lunch, weekend and 80% evening news is shared with Central (West)
Are there any self-help relays?
Braunstone | Transposer | 5 km SW Leicester city centre | 170 homes |
How will the Waltham (Leicestershire, England) transmission frequencies change over time?
1984-97 | 1997-98 | 1998-2011 | 2011-13 | 2013-18 | 2013-17 | 4 Mar 2020 | |||
C/D E | E | E | W | W T | W T | W T | |||
C26 | LNG | LNG | |||||||
C29 | SDN | SDN | SDN | SDN | |||||
C31 | com7 | com7 | |||||||
C32 | BBCA | ||||||||
C34 | D3+4 | ||||||||
C35 | C5waves | C5waves | BBCB | ||||||
C37 | com8 | com8 | |||||||
C41 | _local | ||||||||
C49tv_off | BBCA | BBCA | |||||||
C54tv_off | C4waves | C4waves | C4waves | D3+4 | D3+4 | D3+4 | |||
C55tv_off | com7tv_off | ||||||||
C56tv_off | ArqA | ArqA | ArqA | COM8tv_off | |||||
C57tv_off | ArqB | ArqB | ArqB | ||||||
C58tv_off | BBC1waves | BBC1waves | BBC1waves | BBCB | BBCB | BBCB | |||
C61 | ITVwaves | ITVwaves | ITVwaves | BBCA | |||||
C64 | BBC2waves | BBC2waves | BBC2waves |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 17 Aug 11 and 31 Aug 11.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-5 | 250kW | |
BBCA, D3+4, BBCB | (-7dB) 50kW | |
SDN, ARQA, ARQB | (-10dB) 25kW | |
com8 | (-12.7dB) 13.4kW | |
com7 | (-13.9dB) 10.2kW | |
Mux 1* | (-14dB) 10kW | |
Mux 2*, Mux A*, Mux B* | (-14.9dB) 8kW | |
Mux C*, Mux D*, LNG | (-17dB) 5kW |
Local transmitter maps
Waltham Freeview Waltham DAB Waltham TV region BBC East Midlands Central (East micro region)Which companies have run the Channel 3 services in the Waltham transmitter area
|
|
Friday, 15 April 2011
Hello. My location is in NG31 and I have line of sight to Waltham (13 miles). I have been having the same problems over the last couple of days with stations on Mux 2. I have two identical wideband antennae in the attic and the signal strength has always been excellent from both.
To regain the Mux 2 stations on the Panasonic TV, I had to delete and then do a full scan. This worked eventually. The second antenna feeds a Vivanco Pro DVB-T USB2 tuner running into a PC. The cable run on this is even shorter than the one to the TV (about 4 metres).
Using the provided software and selecting Waltham for scanning, the missing stations are indicated by name and frequency (490000) but no signal. When I again deleted all stored stations and scanned selecting 'All UK transmitters', the missing channels were restored albeit at a slightly lower signal strength (sorry, I have no dB readout) but still excellent quality. I assume that the Mux 2 channels are now being received on a sidelobe from Sandy Hill.
I am confused, as prior to the recent changes, all stations were received from Waltham on equal signal strengths. It appears that the Mux 2 is on a slightly lower power output (8KW) than some of the others but Muxes B, C, and D produce excellent results from Waltham although stated to be on only 5KW output.
I have never believed in the received view that matters 'technical' are a matter of logic. There must be gremlins in the area. Although I am of course open to persuasion that I am wrong.
Regards
Nigel
link to this comment |
J
Jonathan2:34 PM
Newark
@Briantist - Other people in our village have the same problem.
link to this comment |
Reference my last. Please ignore the comment about 'sidelobe' as I assume the Sandy Hill transmitter is as near to omnidirectional as makes no difference.
Nigel
link to this comment |
S
Simon4:12 PM
Nottingham
Like many others, I lost Mux 2 on 13 April in NG8 postcode using Waltham. I have a rooftop aerial which serves a Humax 9300 upstairs and a Humax 9200 downstairs. The Humax 9300 retuned no problem and picked up Ch31. I have tried many times to retune the Humax 9200 downstairs and it is having none of it. I've read through numerous threads and cannot believe that all of these similar issues are coincidental.
Any bright ideas would be gratefully received..?
link to this comment |
S
Steve4:27 PM
Spalding
Simon, have you tried switching your two boxes round? Would the 9300 still recieve mux2 downstairs, and would the 9200 tune it in upstairs?
link to this comment |
S
Simon4:39 PM
Nottingham
I recall an advertising slogan "it's good to talk"! It's amazing how such an obvious thing can be missed when you get so embedded and frustrated with it! However, this might just lead me to either having a problem with the reception downstairs or needing to acquire a new PVR?
I'll give it a try later - thanks Steve.
link to this comment |
M
maxcranwell5:10 PM
Lincoln
we are almost perfectly placed between the two transmitters, Belmont - 36.5km 22.7 miles
Waltham - 36.4km 22.6 miles. Have been using digital services for years no problem and had upgraded equipment to receive HD this year. All was great until the 13th. It now seems neither is delivering a strong enough signal for us to get ITV, yet both deliver strong enough signal for BBC Lincs Yorks or East Mids. We have no RF devices, I have done full factory reset on Akura TV Phillips TV and Samsung TV. Does anyone know if the strengh of the signal reduced with this change?
link to this comment |
L
Lee Gillyon7:22 PM
Nottingham
hi I am in NG5 and I have lost itv channel 4 etc as well. SOmebody must know what the problem is??
link to this comment |
S
Steve C8:02 PM
Hi All
I like others who have posted here in the last couple of days am having the same problems with missing channels.
I phoned the digital TV help line today and I was told there have been many calls about lost channels after the Waltham retune the other day. I was also told that the problem should be fixed by 6pm this evening. It's now 7:45 and still no channels.
This reminds me of problems a couple of years ago when they did a retune and some of my older Digi Boxes would not work so I had to replace them.
Can anyone answer this for me. I have 2x Panasonic TV's Less that 9 months old that have retuned OK and I have signal strength on the ITV (Channel 3)of 10 and the quality of signal is 9.
I have a slightly older Samsung TV (2 Years) which will not find ITV and other channels. I have even taken the Samsung and plugged it into the aerial point of the working Panasonic.
I also have 3x other set top boxes and none of thes will find ITV and the missing channels.
Why are my Panasonic TV's Working and the others are not?
Does this mean we will have to go out and replace our equipment again?
Steve C
link to this comment |
Select more comments
Your comment please