Full Freeview on the Tacolneston (Norfolk, England) transmitter
Google Streetview | Google map | Bing map | Google Earth | 52.518,1.139 or 52°31'6"N 1°8'22"E | NR16 1DW |
The symbol shows the location of the Tacolneston (Norfolk, England) transmitter which serves 330,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Tacolneston (Norfolk, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Tacolneston transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Tacolneston transmitter?

BBC Look East (East) 0.8m homes 3.2%
from Norwich NR2 1BH, 16km northeast (37°)
to BBC East region - 27 masts.
70% of BBC East (East) and BBC East (West) is shared output

ITV Anglia News 0.8m homes 3.2%
from NORWICH NR1 3JG, 16km northeast (38°)
to ITV Anglia (East) region - 26 masts.
All of lunch, weekend and 80% evening news is shared with Anglia (West)
Are there any self-help relays?
Gt Yarmouth | Transposer | 1 km S town centre | 30 homes |
Lowestoft (2) | Transposer | Rotterdam Rd | 125 homes |
How will the Tacolneston (Norfolk, England) transmission frequencies change over time?
1950s-80s | 1984-97 | 1997-98 | 1998-2011 | 2011-13 | 2013-18 | 2013-17 | 17 Jul 2018 | ||
VHF | C/D E | C/D E | C/D E | E | E T | W T | W T | ||
C3 | BBCtvwaves | ||||||||
C31 | com7 | com7 | |||||||
C32 | _local | ||||||||
C37 | com8 | com8 | |||||||
C39 | +ArqB | +ArqB | ArqB | ||||||
C40 | BBCA | ||||||||
C42 | SDN | SDN | SDN | SDN | |||||
C43 | D3+4 | ||||||||
C45 | ArqA | ArqA | ArqA | ArqA | |||||
C46 | BBCB | ||||||||
C50tv_off | BBCB | BBCB | |||||||
C52tv_off | C5waves | C5waves | |||||||
C55tv_off | BBC2waves | BBC2waves | BBC2waves | -BBCA | -BBCA | -BBCA | com7tv_off | ||
C56tv_off | COM8tv_off | ||||||||
C57tv_off | LNR | LNR | |||||||
C59tv_off | ITVwaves | ITVwaves | ITVwaves | -D3+4 | -D3+4 | -D3+4 | |||
C62 | BBC1waves | BBC1waves | BBC1waves | BBCB | |||||
C65 | C4waves | C4waves | C4waves |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 9 Nov 11 and 23 Nov 11.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 250kW | |
SDN, ARQA, ARQB, BBCA, D3+4, BBCB | (-4dB) 100kW | |
com7 | (-9.6dB) 27.4kW | |
com8 | (-10.2dB) 24kW | |
Mux 1*, Mux 2*, LNR | (-14dB) 10kW | |
Mux A*, Mux B*, Mux C*, Mux D* | (-17dB) 5kW | |
Analogue 5 | (-18dB) 4kW |
Local transmitter maps
Tacolneston Freeview Tacolneston DAB Tacolneston TV region BBC East Anglia (East micro region)Which companies have run the Channel 3 services in the Tacolneston transmitter area
|
|
Thursday, 12 June 2014
S
stuart5:50 PM
I have lost all signal on my tv no freeview at all, I live in NR14NS..
Any idea as Bt can't help me and it's up a frustrating thing, apparently engineering work may be happening but no one can help us or confirm anything
Any help or advice is welcomed
Stuaty
link to this comment |
Dave Lindsay
5:58 PM
5:58 PM
stuart: If you are using a powered amplifier (booster) then this could have failed as it would likely result in no or little signal. The fact that the power light may be on is no indication that it is functioning correctly.
link to this comment |
Dave Lindsay
5:59 PM
5:59 PM
stuart: There is engineering work on at Tacolneston which could mean weak signal, so perhaps the level of the signal is now below that which your TV requires to resolve a picture.
link to this comment |
S
stuart6:10 PM
Hi Dave,
Thanks for the help, is there any information online about how long the work is lasting?
link to this comment |
Dave Lindsay
6:18 PM
6:18 PM
stuart: Not that I'm aware of. The information on this site is sourced from Digital UK:
Digital UK - Planned Engineering Works
The low power isn't forced to last the duration of the works and may be engaged when required, depending on what is needing to be done and safety of those doing the work.
link to this comment |
M
MikeB7:00 PM
Norwich
stuart: I've just checked your terrain plot and position - your only 18km away from the transmitter, with nothing in the way. If your signal is suddenly too low, its unlikely your signal was marginal to begin with.
Check your system, it sounds like something has broken.
BTW - is it me, or is there suddenly a rash of such problems?
link to this comment |
Dave Lindsay
7:20 PM
7:20 PM
MikeB: Whilst the terrain plot may show clear line-of-sight, the size of aerials in the area and the fact that Digital UK doesn't give 100s across the board suggests that objects nearby on the ground could be a source of difficulty it looks like the prison could be in the way.
link to this comment |
M
MikeB7:29 PM
Norwich
Dave Lindsay: Your absolutely right, but it is strange that there should be no signal at all. Frankly, the whole of the Talcneston area is a bit odd in reception terms, so perhaps not so strange after all!
link to this comment |
MikeP
8:32 PM
8:32 PM
MikeB
As you know, DTV is particularly sensitive to signal strnegth variations. And the design of equipment has limitations. When a TV/box is getting a weak signal that is below the threshhold for decoding it will show a 'No Signal' message - even when there is a signal but it is too weak to decode. A similar situation occurs with too strong a signal as the tuner is 'swamped' and hence the data cannot be decoded, so again a 'No Signal' message - even though there is actually too much! The latter seems to be a particular problem with the HD transmissions, they appear to be particularly susceptible to signal strength variations as shown by questions elsewhere on this website.
link to this comment |
J
jb389:27 PM
stuart: Apart from anything that has already been said, have you as yet verified if anyone else in your immediate locality is also experiencing a total loss of Freeview reception?
link to this comment |
Select more comments
Your comment please