Full Freeview on the Malvern (Worcestershire, England) transmitter
Google map | Bing map | Google Earth | 52.116,-2.331 or 52°6'56"N 2°19'53"W | WR14 4AD |
The symbol shows the location of the Malvern (Worcestershire, England) transmitter which serves 58,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
_______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
The Malvern (Worcestershire, England) mast is not one of the extended Freeview HD (COM7 and COM8) transmitters, it does not provide these high definition (HD) channels: .
If you want to watch these HD channels, either use Freesat HD, or move your TV aerial must point to one of the 30 Full Freeview HD transmitters. For more information see the want to know which transmitters will carry extra Freeview HD? page.
Which Freeview channels does the Malvern transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Are you trying to watch these 0 Freeview HD channels?
The Malvern (Worcestershire, England) mast is not one of the extended Freeview HD (COM7 and COM8) transmitters, it does not provide these high definition (HD) channels: .
If you want to watch these HD channels, either use Freesat HD, or move your TV aerial must point to one of the 30 Full Freeview HD transmitters. For more information see the want to know which transmitters will carry extra Freeview HD? page.
Which BBC and ITV regional news can I watch from the Malvern transmitter?

BBC Midlands Today 2.9m homes 10.9%
from Birmingham B1 1RF, 49km northeast (36°)
to BBC West Midlands region - 66 masts.

ITV Central News 2.9m homes 10.9%
from Birmingham B1 2JT, 49km northeast (35°)
to ITV Central (West) region - 65 masts.
All of lunch, weekend and 80% evening news is shared with Central (East)
How will the Malvern (Worcestershire, England) transmission frequencies change over time?
1984-97 | 1997-98 | 1998-2011 | 2011-13 | 7 Mar 2018 | |||||
C/D E | C/D E | C/D E | C/D E T | W T | |||||
C29 | SDN | ||||||||
C31 | ArqA | ||||||||
C37 | ArqB | ||||||||
C41 | BBCA | ||||||||
C44 | D3+4 | ||||||||
C47 | BBCB | ||||||||
C50tv_off | SDN | ||||||||
C51tv_off | _local | _local | |||||||
C53tv_off | BBCA | ||||||||
C55tv_off | ArqB | ||||||||
C56tv_off | BBC1waves | BBC1waves | BBC1waves | ||||||
C57tv_off | D3+4 | ||||||||
C59tv_off | -ArqA | ||||||||
C60tv_off | -BBCB | ||||||||
C62 | BBC2waves | BBC2waves | BBC2waves | ||||||
C66 | ITVwaves | ITVwaves | ITVwaves | ||||||
C68 | C4waves | C4waves | C4waves |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 7 Sep 11 and 21 Sep 11.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 2kW | |
SDN, ARQA, ARQB, BBCA, D3+4, BBCB | (-7dB) 400W | |
Mux 1*, Mux 2*, Mux A*, Mux B*, Mux C*, Mux D* | (-10dB) 200W |
Local transmitter maps
Malvern Freeview Malvern DAB Sutton Coldfield TV region BBC West Midlands Central (West micro region)Which companies have run the Channel 3 services in the Sutton Coldfield transmitter area
|
|
Thursday, 11 August 2011
MALVERN transmitter - Freeview BBC Digital TV (Four, Cbeebies, Parliament, 3... Off Air; DSO related from 01:21 yesterday to 02:44 yesterday BBC Digital TV (One, Two, Three, CBBC, News) Off Air; DSO related from 01:22 yesterday to 02:43 yesterday [BBC] Over the next week Malvern relay: TV (analogue) working normally, TV (digital) Service Shutdowns, Radio (analogue) working normally, Radio (digital) working normally. [DUK]
link to this comment |
MALVERN transmitter - Freeview BBC Digital TV (Four, Cbeebies, Parliament, 3... Off Air; DSO related from 01:21 yesterday to 02:44 yesterday BBC Digital TV (One, Two, Three, CBBC, News) Off Air; DSO related from 01:22 yesterday to 02:43 yesterday [BBC] Over the next week Malvern relay: TV (analogue) working normally, TV (digital) Service Shutdowns, Radio (analogue) working normally, Radio (digital) working normally. [DUK]
link to this comment |
Friday, 12 August 2011
MALVERN transmitter - Freeview BBC Digital TV (Four, Cbeebies, Parliament, 3... Off Air; DSO related from 01:21 on 10 Aug to 02:44 on 10 Aug BBC Digital TV (One, Two, Three, CBBC, News) Off Air; DSO related from 01:22 on 10 Aug to 02:43 on 10 Aug [BBC] Over the next week Malvern relay: TV (analogue) working normally, TV (digital) Service Shutdowns, Radio (analogue) working normally, Radio (digital) working normally. [DUK]
link to this comment |
MALVERN transmitter - Freeview BBC Digital TV (Four, Cbeebies, Parliament, 3... Off Air; DSO related from 01:21 on 10 Aug to 02:44 on 10 Aug BBC Digital TV (One, Two, Three, CBBC, News) Off Air; DSO related from 01:22 on 10 Aug to 02:43 on 10 Aug [BBC] Over the next week Malvern relay: TV (analogue) working normally, TV (digital) Service Shutdowns, Radio (analogue) working normally, Radio (digital) working normally. [DUK]
link to this comment |
Sunday, 14 August 2011
MALVERN transmitter - Freeview BBC Digital TV (Four, Cbeebies, Parliament, 3... Off Air; DSO related from 01:21 on 10 Aug to 02:44 on 10 Aug BBC Digital TV (One, Two, Three, CBBC, News) Off Air; DSO related from 01:22 on 10 Aug to 02:43 on 10 Aug [BBC]
link to this comment |
MALVERN transmitter - Freeview BBC Digital TV (Four, Cbeebies, Parliament, 3... Off Air; DSO related from 01:21 on 10 Aug to 02:44 on 10 Aug BBC Digital TV (One, Two, Three, CBBC, News) Off Air; DSO related from 01:22 on 10 Aug to 02:43 on 10 Aug [BBC]
link to this comment |
Monday, 15 August 2011
M Wainwright: You should probably just hang on until 7th/14th September 2011 when switchover on the Malvern transmitter is complete: All six multiplexes will operate at 400W and in the same mode (well, except the HD one) and should provide the same signal quality to you for all services.
link to this comment |
Sunday, 21 August 2011
M
m Wainwright10:38 AM
Briantist. Many thanks for your comments, after the community housing ariel engineer tried just about everything possiblle, he arrived at the same conclusion as you did, however there may be more problems after the signal is boosted to full power, mainly caused by a signal being picked up through the back of the ariel from the more powerful sutton transmitter. But it seems to be a case of wait and see. Thanks again.
link to this comment |
Thursday, 25 August 2011
m Wainwright: Thanks. Can you please let me know how you get on next month?
link to this comment |
M
Mike Dimmick2:20 PM
m Wainwright: If you have two different transmitter IDs showing up, it's likely that you have a case of Digital Region Overlap. A couple of threads on avforums.com suggest that transmitter ID 3064 is Sutton Coldfield while 3084 is The Wrekin, though the 'name' is set to West Midlands for both. Malvern might be using the same multiplex data as Sutton Coldfield, though.
In the screen that's showing the transmitter IDs, can you check that the UHF channels/frequencies it's tuned into match those that Malvern transmits on? To calculate the frequency for a channel number, subtract 21 from the channel number, multiply by 8000 kHz, and add 474000 kHz. If there is a + after the channel number, add 167 kHz and if a -, subtract 167 kHz.
If the frequencies indicate that other transmitters are being used, try clearing all channels and doing a manual retune on the frequencies used by Malvern. If that produces worse results than what you have now, or it won't tune in at all, the communal system engineer will need to figure out why.
If this is a channelized system - where each channel desired is filtered and amplified separately, all undesired channels being unamplified or even dropped - it will need to be retuned at switchover. Make sure that the engineer is using the *current* list of channel numbers (middle row above) rather than the after DSO list (bottom row): unusually, Malvern will use *none* of the current channels, either analogue or digital, after DSO. (The local service on C51 won't start until at least 2013.).
link to this comment |
Select more comments
Your comment please