menuMENU    UK Free TV logo Freeview

 

 

Click to see updates

Full Freeview on the Bilsdale (North Yorkshire, England) transmitter

first published this on - UK Free TV
sa_streetviewGoogle Streetviewsa_gmapsGoogle mapsa_bingBing mapsa_gearthGoogle Earthsa_gps54.358,-1.151 or 54°21'30"N 1°9'2"Wsa_postcodeTS9 7JS

 

The symbol shows the location of the Bilsdale (North Yorkshire, England) transmitter which serves 570,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.

Are there any planned engineering works or unexpected transmitter faults on the Bilsdale (North Yorkshire, England) mast?

BILSDALE transmitter - Freeview: Off air due to a fire. Go to our Works and Warnings section for more information. from 10 Aug 13:26. . DAB: Off the air due to a fault from 10 Aug 13:41. . BBC


Choose from three options: ■ List by multiplex ■ List by channel number ■ List by channel name
_______

Which Freeview channels does the Bilsdale transmitter broadcast?

If you have any kind of Freeview fault, follow this Freeview reset procedure first.

Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.

MuxH/VFrequencyHeightModeWatts
PSB1
BBCA
 H max
C27 (522.0MHz)676mDTG-100,000W
Channel icons
1 BBC One (SD) North East and Cumbria, 2 BBC Two England, 9 BBC Four, 23 BBC Three, 201 CBBC, 202 CBeebies, 231 BBC News, 232 BBC Parliament, 250 BBC Red Button, plus 15 others

PSB2
D3+4
 H max
C24 (498.0MHz)676mDTG-100,000W
Channel icons
3 ITV 1 (SD) (Tyne Tees), 4 Channel 4 (SD) North ads, 5 Channel 5, 6 ITV 2, 10 ITV3, 13 E4, 14 Film4, 15 Channel 4 +1 North ads, 18 More4, 26 ITV4, 30 E4 +1, 35 ITV1 +1 (Tyne Tees),

PSB3
BBCB
 H max
C21 (474.0MHz)676mDTG-100,000W
Channel icons
56 5SELECT, 101 BBC One HD (England no regional news), 102 BBC Two HD (England), 103 ITV 1 HD (ITV Granada), 104 Channel 4 HD North ads, 105 Channel 5 HD, 106 BBC Four HD, 109 BBC Three HD, 204 CBBC HD, 205 CBeebies HD, plus 1 others

COM4
SDN
 H -3dB
C43 (650.0MHz)676mDTG-850,000W
Channel icons
20 Drama, 21 5USA, 29 ITV2 +1, 32 5STAR, 33 5Action, 41 Legend, 42 GREAT! movies action, 46 Channel 5 +1, 58 ITVBe +1, 59 ITV3 +1, 64 Blaze, 67 CBS Reality, 74 Dave ja vu, 78 TCC, 81 Blaze +1, 89 ITV4 +1, 203 CITV, 208 POP MAX, 209 Ketchup TV, 210 Ketchup Too, 211 YAAAS!, plus 14 others

COM5
ArqA
 H -3dB
C46 (674.0MHz)681mDTG-850,000W
Channel icons
11 Sky Arts, 17 Really, 19 Dave, 31 E4 Extra, 36 pick, 40 Quest Red, 43 Food Network, 47 Film4 +1, 48 Challenge, 49 4seven, 57 Smithsonian Channel, 60 Drama +1, 70 Quest +1, 75 Yesterday +1, 83 Together TV, 233 Sky News, plus 9 others

COM6
ArqB
 H -3dB
C40 (626.0MHz)681mDTG-850,000W
Channel icons
12 Quest, 25 W, 27 Yesterday, 34 GREAT! movies, 39 DMAX, 44 HGTV, 71 Quest Red +1, 73 HobbyMaker, 82 Talking Pictures TV, 84 PBS America, 88 Classic Hits, 235 Al Jazeera Eng, plus 19 others

DTG-8 64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)

Which BBC and ITV regional news can I watch from the Bilsdale transmitter?

regional news image
BBC Look North (Newcastle) 1.6m homes 6.0%
from Newcastle NE99 2NE, 74km north-northwest (336°)
to BBC North East and Cumbria region - 70 masts.
regional news image
ITV Tyne Tees News 1.4m homes 5.4%
from Gateshead NE11 9SZ, 75km north-northwest (333°)
to ITV Tyne Tees region - 47 masts.
All of lunch, weekend and 50% evening news is shared with Border

Are there any self-help relays?

Garsdale (pin Fold)Transposer63 homes (coverage together with SH34)
Hawsker BottomActive deflector 150 caravans
LangthwaiteActive deflector30 homes

How will the Bilsdale (North Yorkshire, England) transmission frequencies change over time?

1984-971997-981998-20122012-1313 Nov 2019
A K TA K TA K TK TW T
C21BBCB
C23C4wavesC4wavesC4wavesBBCB
C24_localD3+4
C26BBC2wavesBBC2wavesBBC2wavesBBCA
C27BBCA
C29ITVwavesITVwavesITVwavesD3+4
C30_local
C31com7
C33BBC1wavesBBC1wavesBBC1waves
C35C5wavesC5waves
C37com8
C40ArqBArqB
C43SDNSDN
C46ArqAArqA
C55tv_offcom7tv_off
C56tv_offCOM8tv_off

tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 12 Sep 12 and 26 Sep 12.

How do the old analogue and currrent digital signal levels compare?

Analogue 1-5 500kW
BBCA, D3+4, BBCB(-7dB) 100kW
SDN, ARQA, ARQB(-10dB) 50kW
com7(-14.3dB) 18.5kW
com8(-14.4dB) 18.1kW
Mux 2*, Mux A*, Mux B*, Mux C*(-19.2dB) 6kW
Mux 1*(-20.2dB) 4.8kW
Mux D*(-24.9dB) 1.6kW

Which companies have run the Channel 3 services in the Bilsdale transmitter area

May 1956-Jul 1968Granada Television†
May 1956-Jul 1968Associated British Corporation◊
Jul 1968-Jul 1974Yorkshire Television
Jul 1974-Feb 2004Tyne Tees Television
Feb 2004-Dec 2014ITV plc
Feb 1983-Dec 1992TV-am•
Jan 1993-Sep 2010GMTV•
Sep 2010-Dec 2014ITV Daybreak•
• Breakfast ◊ Weekends ♦ Friday night and weekends † Weekdays only. Bilsdale was not an original Channel 3 VHF 405-line mast: the historical information shown is the details of the company responsible for the transmitter when it began transmitting Channel 3.

Is the transmitter output the same in all directions?

Radiation patterns withheld

Comments
Monday, 3 September 2012
E
ERIC ARMSTRONG
11:45 AM
Guisborough

I HAVE A HIGH GAIN AERIAL ON THE ROOF, POINTING TO THE ESTON BOOSTER. WHAT MUST I DO ON 12th. SEPT.???

link to this comment
ERIC ARMSTRONG's 1 post GB
Dave Lindsay
sentiment_very_satisfiedPlatinum

12:01 PM

ERIC ARMSTRONG: On 12th September the PSB1/BBCA multiplex will come on air. This will give you all the BBC standard definition services plus BBC radio.

Analogue BBC One will take the place of analogue BBC Two. This is so that PSB1 can go on the same UHF channel (frequency) as the former BBC One analogue.

ITV and Channel 4 analogue will continue until 26th September when they will be replaced with the other PSB digital channels.

The Eston transmitter will only carry Public Service channels; the Commercial ones only broadcast from main transmitters and larger relays.

Public Service channels carry BBC standard definition, BBC radio, ITV1, ITV1+1, ITV1HD, ITV2, Channel 4, Channel 4+1, Channel 4 HD, E4, More4 and Channel 5. That's the lot from Eston.

link to this comment
Dave Lindsay's 5,724 posts GB
Dave Lindsay
sentiment_very_satisfiedPlatinum

12:20 PM

Eric Armstrong: There should be no need to adjust your aerial for reception from Eston.

"If" you are to ever receive the Commercial channels (ITV3, Pick TV, Yesterday, Film4, Dave etc) on terrestrial, then you will have to receive from Bilsdale. I say "if", because it may not be a given given Roseberry Topping is in the way.

link to this comment
Dave Lindsay's 5,724 posts GB
N
Neil Osborne
7:38 PM

Hi,

I seem to have lost all channels except bbc1,2,3, cbbc, bbc news and red button. This remains the case no matter how many times I retune. I have always had excellent reception of all channels

Regards

link to this comment
Neil Osborne's 1 post GB
Thursday, 6 September 2012
M
Michael Pickles
3:22 PM

I live in Pudsey, Leeds. My TV has always picked up Tyne Tees for analogue (Bilsdale?) but Yorkshire for Digital (Emley? I believe after having a new aerial around 4 years ago). Around 23:15 on 31 August,Digital went to no signal and has remained that way ever since, I now recieve no channels on either TV, attempts to retune one has lost all channels in the EPG. Tyne Tees analogue has also disappeared. Any suggestions please?

link to this comment
Michael Pickles's 2 posts GB
Dave Lindsay
sentiment_very_satisfiedPlatinum

5:55 PM

Michael Pickles: First and foremost, it is good practice to have the receiver tuned to the transmitter to which the aerial faces. Bilsdale and Emley are in different directions, so at least one must be wrong.

The transmitter that a TV tunes itself to during the automatic tuning process is not forced to be the "right" one for the aerial. Thus, in some cases it is necessary to tune manually or carry out some other workaround in order to get the right transmitter. Not doing so can mean poor reception.


When one encounters "no signal", however tempting, it is usually advisable not to retune because this simply results in the tuned channels being wiped from the memory.

Only in cases where changes have been made at the transmitter end should retuning be carried out. If it turns out that the TV has suddenly "forgotten" the tuned channels, then this tends to indicate a fault with the device.

On the basis that the problem exists with two receivers, it would appear that they are not at fault. By retuning you have compounded the issue by erasing the tuning information from the receivers' memories.


If the Bilsdale analogue signals disappeared, then this perhaps suggests something with your aerial setup. How is the signal distributed? If it is a powered amplifier then it may be at fault. You should try bypassing it by connecting the feed from the aerial directly to a feed to one of your TVs. You will, of course, then have to carry out a retune once you have done this (because you wiped the memory).

If your aerial points to Bilsdale, then bear in mind that its digital signals are still pre-switchover and therefore low power. They may be weak or non-existant at your location. Contrast that with the Emley digital signals which will be as strong as the former analogue (because it has switched to digital and Bilsdale hasn't).

If your aerial points to Bilsdale then can you not receive from Emley or another transmitter that carries Yorkshire programming? The fact that you can do so even though the aerial faces the wrong way (assuming it points to Bilsdale) suggests that this may be a possibility.

link to this comment
Dave Lindsay's 5,724 posts GB
Friday, 7 September 2012
M
Michael Pickles
1:41 PM

Dave Lindsay
- Thank you for the detailed advice. I have found some more information. The house initially had 2 aerials downstairs to Bilsdale, upstairs to Emley. These where upgraded to one shared aerial to Emley around 3 or 4 years ago and upstairs has an amplifier. I have tried bypassing that as you suggested upstairs with no luck. so looks like I will get someone out to check the aerial.

link to this comment
Michael Pickles's 2 posts GB
Dave Lindsay
sentiment_very_satisfiedPlatinum

2:26 PM

Michael Pickles: When you do get it working, if your receiver does default to Bilsdale during its automatic scan, you should be able to avoid this by having the aerial unplugged for the first 30% of the scan.

This is probably not an issue now as Bilsdale is still on low (pre-switchover) power. It switches next Wednesday and Wednesday 26th.

From that point, the digital signals should be of equivalent strength to that of the current analogue. As analogue receivers sometimes default to Bilsdale, so "may" digital ones, although it probably depends on how each "decides" which signals to go with having completed the scan.

link to this comment
Dave Lindsay's 5,724 posts GB
Dave Lindsay
sentiment_very_satisfiedPlatinum

2:53 PM

Michael Pickles: I wonder if you have a masthead amp as well. This will require a separate power supply which could perhaps have failed (or the amp itself has failed).

This may be built in to the distribution amplifier (the one with multiple outputs).

An amplifier with no power to it will give nothing out. That's what makes me wonder if you have a mast-head amp that is now acting as a block for the signal (either through failure of itself or its power supply).

link to this comment
Dave Lindsay's 5,724 posts GB
Tuesday, 11 September 2012
I
Ian Taylor
8:09 AM
Middlesbrough

Is there a specific time on 12th and 26th September when I should retune or do I just wait until my picture disappears and then do it?

link to this comment
Ian Taylor's 7 posts GB
Select more comments

Your comment please
Please post a question, answer or commentIf you have Freeview reception problems before posting a question your must first do this Freeview reset procedure then see: Freeview reception has changed, Single frequency interference, and Freeview intermittent interference.

If you have no satellite signal, see Sky Digibox says 'No Signal' or 'Technical fault'

If you have other problems, please provide a full (not partial) postcode (or preferably enter it in box at the top right) and indicate where if aerial is on the roof, in the loft or elsewhere.

UK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.








Privacy policy: UK Free Privacy policy.