menuMENU    UK Free TV logo Freeview

 

 

Click to see updates
Choose from four options: ■ TV mapping ■ TV terrain plot ■ TV technical ■ Radio

Freeview reception at BT82 1SQ


For reliable and stable Freeview reception, you need an unobstructed path between the TV aerial on your roof and the digital TV transmitter. The map below shows the transmitters predicted to provide a signal at this location.

You can click on any transmitter symbol to show the coverage area as a green overlay on the map. Double click on a transmitter symbol to go to the transmitter information page.

You can also view the ten closest potential '4G-at-800' mobile phone masts within 1.5km of the selected location - these masts may be used for 4G-at-800 mobile broadband services from 2013-2015.

map is loading, please wait...
There are 2 mobile phone masts within 1.5km of BT821SQ (page shows closest 10)

What do the map symbols mean?

 EE,  Multiple operators,  O2,  3,  Vodafone,  location on line-of-sight,  Selected location,  Freeview transmitter,  Freeview light transmitter,  Engineering/fault today.

These icons show the potential locations for 4G-at-700MHz services that may interfere with Freeview reception at some point from 2020 when the 5G 700MHz services start.

For actual mobile phone reception prediction (at 800-960MHz and 1710-2170MHz) see these phone operator's mapping sites: Three O2 T-Mobile EE Virgin

Predicted Freeview channel list

RTÉ One HDHolywell Hill SV2
Virgin Media 1Holywell Hill SV1
TG4 (RoI)Holywell Hill SV1
Virgin Media 3Holywell Hill SV2
Saorview Information (*Holywell Hill SV2
 
RTÉ One +1Holywell Hill SV2
Virgin Media 2 Holywell Hill SV2
Tithe an Oireachtais Holywell Hill SV1
RTÉ jrHolywell Hill SV2
RTÉ News NowHolywell Hill SV1
 
RTÉ2 HDHolywell Hill SV1
RTÉ2+1Holywell Hill SV2
1BBC One (SD)Londonderry Northern IrelandPSB1
2BBC TwoLondonderry Northern IrelandPSB1
3ITV 1 (SD)Londonderry UTVPSB2
 
4Channel 4 (SD)Londonderry UTVPSB2
5Channel 5Londonderry UTVPSB2
6ITV 2Londonderry UTVPSB2
9BBC FourLondonderry Northern IrelandPSB1
10ITV3Londonderry UTVPSB2
 
13E4Londonderry UTVPSB2
14Film4Londonderry UTVPSB2
15Channel 4 +1Londonderry UTVPSB2
18More4Londonderry UTVPSB2
23BBC ThreeLondonderry Northern IrelandPSB1
 
26ITV4Londonderry UTVPSB2
30E4 +1Londonderry UTVPSB2
35ITV1 +1Londonderry UTVPSB2
53TG4Strabane NIMM
54RTÉ OneStrabane NIMM
 
55RTÉ TwoStrabane NIMM
565SELECTLondonderry PSB3
101BBC One HDLondonderry PSB3
102BBC Two HDLondonderry PSB3
103STV HDLondonderry PSB3
 
103ITV 1 HDLondonderry PSB3
103UTV HDLondonderry PSB3
104Channel 4 HDLondonderry PSB3
105Channel 5 HDLondonderry PSB3
106BBC Four HDLondonderry PSB3
 
108BBC Scotland HDLondonderry PSB3
109BBC Three HDLondonderry PSB3
110Channel 4 HD (Wales)Londonderry PSB3
201CBBCLondonderry Northern IrelandPSB1
202CBeebiesLondonderry Northern IrelandPSB1
 
204CBBC HDLondonderry PSB3
205CBeebies HDLondonderry PSB3
231BBC NewsLondonderry Northern IrelandPSB1
232BBC ParliamentLondonderry Northern IrelandPSB1
250BBC Red ButtonLondonderry Northern IrelandPSB1
 

 

Advanced options

Show good and blocked paths from BT82 1SQ for aerial height of ...

10m20m (Angel of the North)25m30m40m56m (Hyde Park Flats, Sheffield)62m (Monument)90m (Royal Liver Building, Liverpool)107m (Meridian Quay Tower, Swansea)115m (Bridgewater Place, Leeds)127m (Glasgow Tower)143m (Guy's Hospital)158m (Blackpool Tower)170m (Spinnaker Tower, Portsmouth)180m (The Gherkin/BT Tower) 193m (Tower 42)235m (Canary Wharf)310m (The Shard)(default view)

Comments
Thursday, 2 November 2017
R
RDD
11:14 AM
Stansted

http://downdetector.co.uk/problems/freeview

link to this comment
RDD's 12 posts GB
MikeP
sentiment_very_satisfiedPlatinum

11:53 PM

To All:

Please read Freeview blames air pressure for TV disruption - BBC News about interference on Freeview.



link to this comment
MikeP's 3,056 posts GB
Monday, 6 November 2017
R
RDD
10:36 AM
Stansted

Attenuators, Crystal Palace transmitter- Gable end Televes aerial..
Signal from masthead amp loops through DVR to HD TV. . It seems signal is boosted by the DVR as a result of the loop though.

DVR signal strength all channels circa 45%, Quality 100% - Very rarely use HD.

HDTV Signal strength all channels circa 90%+ ,Quality 100% - Sometimes lose channels - Overload??

Can not loop through HD TV to DVR. So attenuator needed between the DVR and HDTV.

What -db size of attenuator should I aim for. Thank you

link to this comment
RDD's 12 posts GB
S
StevensOnln1
sentiment_very_satisfiedPlatinum

12:56 PM

RDD: What signal strength do you get if you bypass the DVR and connect the aerial feed from the amp directly to the TV? Check the menu on the DVR, there may be an option to reduce the gain from the built in amplifier. Failing that, try a 3dB attenuator such as the one linked below (get a 6dB at the same time in case 3dB isn't enough).

3dB Coax Plug Inline ATTENUATOR: Amazon.co.uk: Electronics

link to this comment
StevensOnln1's 3,516 posts GB
Tuesday, 7 November 2017
R
RDD
12:43 PM
Stansted

StevensOnln1:
Thanks for the input.
Your suggestion re:-
A) connecting after mast amp direct to HDTV ( i.e. not looping through DVR) results - very little, if any change, to Signal Strength (High 90s%) & Signal Quality. 100% .
B) On reconnecting to the DVR ( loop through), there was only a DVR setting to switch on or off the loop connection to the TV.. No means of adjusting any strength on loop output.

From the above, quite surprised that the signal strength for the various channels reported by the DVR is so much lower , compared to those obtained by the direct connection to the HDTV.

So off to ebay to get an attenuator. Do you think a variable one would be OK, save having to buy two of different -db values. Also as I am going to have to renew the aerial - (latter beginning to fall apart - result copulating pigeons, corrosion etc. ) , a variable attenuator might give greater flexibility??

Thanks again for your help/feedback.

link to this comment
RDD's 12 posts GB
M
MikeB
sentiment_very_satisfiedPlatinum

2:14 PM

RDD: You could do what I've done, and have for some years - split the feeds from the wall. I originally did it when it turned out that my PVR was much more sensitive than the freeview box, after getting a new aerial.

One of the reps at work (who'd formerly been a TV installer) kindly made up a set for me, but its easy enough yourself.A decent bit of coax out of the wall socket, then a good quality splitter, then two cables off that, one to the PVR and one to the TV. Mine has F-fittings, but whatever works.

Then you can vary the attenuation seperately, and looping through isn't an issue. I got a variable one, but it didn't seem to do much, so I got some from Amazon (the same as these https://www.maplin.co.uk/…59p) which fit into one another, so you can buy perhaps a 3db, a 5db and so on, and put them in series to get the right level.

The trouble with a masthead amp is that you can't just switch it off (my new house has one), but at least you can dampen it down.

link to this comment
MikeB's 2,579 posts GB
R
RDD
3:28 PM
Stansted

MikeB:
Thanks for the suggestion. My concern is that splitting at the wall will lower the signal to the DVR which is already at circa 55% . However this could be due to the tuners of the DVR being less sensitive than the tuner of the HDTV..

However, I will give it a try and see what happens, I think I have enough bits a pieces to rig your suggestion up.
I will let you know. Thanks.

link to this comment
RDD's 12 posts GB
Wednesday, 6 December 2017
X
XIAO
9:37 PM
Whitstable

I had a alba set top box connected to my tv, recently I can't get any channels on the tv, it just keep showing no or bad signals. Any helps?

link to this comment
XIAO's 1 post GB
S
StevensOnln1
sentiment_very_satisfiedPlatinum

10:59 PM

XIAO: Have you checked for any loose or damaged cables or connections behind your TV and set top box?

link to this comment
StevensOnln1's 3,516 posts GB
Friday, 19 January 2018
A
Allyson
11:36 AM
Newport

I've bought a new freeview equipped television but can't get freeview on it.
Can anyone tell me what I have to do? Is there an indoor aerial I could buy for it, that would receive signal from so far away as Wenvoe?
I live in a block of flats, so getting an outside aerial installed on the roof is out of the question.
The television does work because I took it to a friend, who plugged it in and there were no problems.

link to this comment
Allyson's 3 posts GB
Select more comments

Your comment please
Please post a question, answer or commentIf you have Freeview reception problems before posting a question your must first do this Freeview reset procedure then see: Freeview reception has changed, Single frequency interference, and Freeview intermittent interference.

If you have no satellite signal, see Sky Digibox says 'No Signal' or 'Technical fault'

If you have other problems, please provide a full (not partial) postcode (or preferably enter it in box at the top right) and indicate where if aerial is on the roof, in the loft or elsewhere.

UK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.








Privacy policy: UK Free Privacy policy.