menuMENU    UK Free TV logo Help!

 

 

Click to see updates

What can I do when my Sky Digibox says 'No Signal' or 'Technical fau

What can I do when my Sky Digibox says 'No Signal' or 'Technical fault'?

What can I do when my Sky Digibox says 'No Signal' or &
published on UK Free TV

How to Reset a Sky Digibox when 'No Signal' appears.

Reset method 1 - Delete and Rescan

  1. Turn the power off at the mains socket. Either do this by pulling the plug from the socket, or using a power switch if there is one.

  2. Remove the viewing card from the machine. Using a dry cloth or kitchen roll, clean the gold connector on the reverse of the card. Do not use any cleaning products.

  3. Check cables and connectors are in good order.
  4. Wait for at least 30 seconds.
  5. With the card still out of the machine, plug the Digibox back into the mains.
  6. Ignore all the messages, and wait for around a minute.
  7. Try 101 for BBC One, 102 for BBC Two and 103 for ITV-1.
  8. Insert viewing card, wait a few seconds.
  9. Check 104 for Channel 4 and 105 for five.


Reset Method 2 - Reset the LNB

If the above method does not work, the LNB may have a fault.
  1. Press the [SERVICES] button and then press [4] [0] [1] then [SELECT]

    On Sky HD, press the [SERVICES] button and then press [0] [0] [1] then [SELECT]

    Press the buttons in the sequence above exactly - do not atttempt to use [UP] or [DOWN]. Note that when you press the second 0 and 1 nothing happens on the screen until you press the final [SELECT]. This is a "hidden menu".



  2. Then press [1] to go to the RF output menu.
  3. Press [DOWN] three times to highlight the line 22Khz Command and then press [RIGHT] to change the value to [OFF].
  4. Press [DOWN] and [SELECT] to select Save New Settings.
  5. Press [SKY].
  6. Again press [SERVICES], [4], [0], [1], [SELECT]; then [1] again for the LNB Menu. (SERVICES 0 0 1 SELECT for Sky HD).
  7. Now press the [RED] button (reset all settings), then [DOWN] until you can select Save New Settings again.
  8. Press [SKY].


Reset Method 3 - Upgrade the system software

If there are still problems:

  1. Turn the Digibox off at the mains again and remove the viewing card.
  2. Whilst holding down the BACKUP key on the Digibox - NOT ON THE REMOTE - turn the mains power on.
  3. Keep hold of BACKUP until the screen displays a "UPGRADING SYSTEM SOFTWARE" message – this will be white text on a black screen. On some boxes this can appear as a half screen.

  4. Wait 10 to 20 minutes for the software to download and install. The box will restart when the process is complete.
  5. Ignore all the messages, and wait for around a minute.
  6. Try 101 for BBC One, 102 for BBC Two and 103 for ITV-1.
  7. Insert viewing card, wait a few seconds.
  8. Check 104 for Channel 4 and 105 for five.


All questions
BBC Three Linear channel re-opens1
Removing all barriers to communication between diverse cultures2
How do I get a test card with Freeview3
What can I do when my Sky Digibox says 'No Signal' or 'Technical fau4
Can I receive UK TV in Ghana?5
[][][
In this section
Can I use my ex-contract sky digital satellite receiver to get Freeview channels1
Can I stop paying Sky and use my satellite receiver to get Freeview ?2
I have a Panasonic TV with integrated Freeview how can I record Freeview channel3
My Sky box has a "no signal message" - what do I do?4
How do I change the RF output channel on a Sky Digibox?5
I have split the signal from my satellite dish and now nothing works.6

Comments
Sunday, 9 October 2011
P
Phill
8:33 PM

Good evening.
This question to do wit Freeview/Saorview.
Could you tell me if my Freeview HD receiver will work in Southern Ireland ,there version is called Saorview which comes in next year.
Or is it completely diferant.

link to this comment
Phill's 4 posts GB
KB Aerials Sheffield
sentiment_satisfiedSilver

9:15 PM
Sheffield

Phil I would answer if I knew

BUT -- Why are you asking this question in the forum that is called

Free to watch on satellite - Most popular questions
What can I do when my Sky Digibox says 'No Signal' or 'Technical fault'?

Satellite being the topic of conversation in this thread - you would be better off searching for discussions (if any are available) regarding your transmitter

Keith


link to this comment
KB Aerials Sheffield's 274 posts GB
Monday, 10 October 2011
M
melvin
10:06 AM
London

for some reason this morning, i got a messege 29 saying no satalite signal is be recieved , what do i do, i have tried disconnecting and re connecting. postcode wc1h 8hh

link to this comment
melvin's 1 post GB
M
Mike Dimmick
sentiment_very_satisfiedPlatinum

12:11 PM

Phill: Saorview launched at the end of last year.

A Freeview HD receiver should implement MPEG-4 AVC on DVB-T, which is required to receive RT 2 when it's broadcasting in HD, even though at present the UK only uses MPEG-4 AVC on a DVB-T2 multiplex.

For interactive text, the Irish standard permits either MHEG-5 as used in the UK, or the legacy teletext system. Freeview HD equipment is not required to implement legacy teletext.

You can check to see whether the address you'll be using the equipment at is covered by going to Coverage Map | SAORVIEW

link to this comment
Mike Dimmick's 2,486 posts GB
D
Doug
9:10 PM

Doug: Regarding my earlier question, I followed the advice I followed method one above, pulling the plug, cleaning the viewing card etc and it worked.

Can now receive the Free to Air channels again.

link to this comment
Doug's 2 posts GB
Friday, 14 October 2011
M
mark
5:15 PM

for some reason the sky box has started saying no satelite signal on certain channels,i have cleaned card,done updates and checked cables,reset box by turning on/off, i get for your information number 36 apears on the top of screen,any ideas,thanks,mark

link to this comment
mark's 2 posts GB
Saturday, 15 October 2011
Briantist
sentiment_very_satisfiedOwner

12:08 PM

mark: Do "Method 2" at the top of the page.

link to this comment
Briantist's 38,844 posts GB
T
Thomas
8:55 PM

Hi!
The previous owner of our flat had sky. The dish is still there but as he did not use a scheme the freeholders offered to get a new, digital ready, areal connection into the flat. So: I have a sky dish outside of the balcony, an old tv and now I am wondering whether I can buy a freesat box and get to watch some tv. Any help will be much appreciated!
Thanks!
Tom

link to this comment
Thomas's 2 posts GB
J
jb38
sentiment_very_satisfiedPlatinum

9:21 PM

Thomas: There is no difference between a Sky box dish and a Freesat one, and so long as the dish hasn't been moved out of alignment then there should be no problems.

You could maybe even purchase a twin tuner Freesat PVR, and if necessary just change the LNB on the dish arm over to a quad version to enable the recording of two separate channels at the same time.

Quad blocks being under £10.00 from numerous e-bay outlets, have a look at the LNB though as it may already have a quad block fitted, that is if the previous owner used Sky+.

link to this comment
jb38's 7,179 posts GB
Sunday, 16 October 2011
N
neil
5:54 PM

hi iam hoping you can help iam getting no satellite signal being received noticed in signal test that lock indicator is not locked would you know how to lock this i have a thomson sky box model no:122.051

link to this comment
neil's 1 post GB
Select more comments

Your comment please
Please post a question, answer or commentUK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.







Privacy policy: UK Free Privacy policy.