menuMENU    UK Free TV logo Help!

 

 

Click to see updates

What can I do when my Sky Digibox says 'No Signal' or 'Technical fau

What can I do when my Sky Digibox says 'No Signal' or 'Technical fault'?

What can I do when my Sky Digibox says 'No Signal' or &
published on UK Free TV

How to Reset a Sky Digibox when 'No Signal' appears.

Reset method 1 - Delete and Rescan

  1. Turn the power off at the mains socket. Either do this by pulling the plug from the socket, or using a power switch if there is one.

  2. Remove the viewing card from the machine. Using a dry cloth or kitchen roll, clean the gold connector on the reverse of the card. Do not use any cleaning products.

  3. Check cables and connectors are in good order.
  4. Wait for at least 30 seconds.
  5. With the card still out of the machine, plug the Digibox back into the mains.
  6. Ignore all the messages, and wait for around a minute.
  7. Try 101 for BBC One, 102 for BBC Two and 103 for ITV-1.
  8. Insert viewing card, wait a few seconds.
  9. Check 104 for Channel 4 and 105 for five.


Reset Method 2 - Reset the LNB

If the above method does not work, the LNB may have a fault.
  1. Press the [SERVICES] button and then press [4] [0] [1] then [SELECT]

    On Sky HD, press the [SERVICES] button and then press [0] [0] [1] then [SELECT]

    Press the buttons in the sequence above exactly - do not atttempt to use [UP] or [DOWN]. Note that when you press the second 0 and 1 nothing happens on the screen until you press the final [SELECT]. This is a "hidden menu".



  2. Then press [1] to go to the RF output menu.
  3. Press [DOWN] three times to highlight the line 22Khz Command and then press [RIGHT] to change the value to [OFF].
  4. Press [DOWN] and [SELECT] to select Save New Settings.
  5. Press [SKY].
  6. Again press [SERVICES], [4], [0], [1], [SELECT]; then [1] again for the LNB Menu. (SERVICES 0 0 1 SELECT for Sky HD).
  7. Now press the [RED] button (reset all settings), then [DOWN] until you can select Save New Settings again.
  8. Press [SKY].


Reset Method 3 - Upgrade the system software

If there are still problems:

  1. Turn the Digibox off at the mains again and remove the viewing card.
  2. Whilst holding down the BACKUP key on the Digibox - NOT ON THE REMOTE - turn the mains power on.
  3. Keep hold of BACKUP until the screen displays a "UPGRADING SYSTEM SOFTWARE" message – this will be white text on a black screen. On some boxes this can appear as a half screen.

  4. Wait 10 to 20 minutes for the software to download and install. The box will restart when the process is complete.
  5. Ignore all the messages, and wait for around a minute.
  6. Try 101 for BBC One, 102 for BBC Two and 103 for ITV-1.
  7. Insert viewing card, wait a few seconds.
  8. Check 104 for Channel 4 and 105 for five.


All questions
BBC Three Linear channel re-opens1
Removing all barriers to communication between diverse cultures2
How do I get a test card with Freeview3
What can I do when my Sky Digibox says 'No Signal' or 'Technical fau4
Can I receive UK TV in Ghana?5
[][][
In this section
Can I use my ex-contract sky digital satellite receiver to get Freeview channels1
Can I stop paying Sky and use my satellite receiver to get Freeview ?2
I have a Panasonic TV with integrated Freeview how can I record Freeview channel3
My Sky box has a "no signal message" - what do I do?4
How do I change the RF output channel on a Sky Digibox?5
I have split the signal from my satellite dish and now nothing works.6

Comments
Tuesday, 11 January 2011
Briantist
sentiment_very_satisfiedOwner

6:16 PM

angie: Not much to go on there.

link to this comment
Briantist's 38,844 posts GB
Wednesday, 12 January 2011
M
mark
10:28 PM

hi, my sky hd box is samsung box, keep freezi ng when changing channel, any1 help, my box is out of warranty so sky want 65 to look at it

link to this comment
mark's 1 post GB
Thursday, 13 January 2011
S
satandpcguy
sentiment_satisfiedBronze

7:33 AM

angie: a bit more information would be useful...we may be good but not mind readers! Where are you, what size dish do you have, LNB, receiver, whats the on screen message on BBC1 or BBC2, can you get ITV1,2,3,4?

In some north eastern areas of spain an 80cm satellite dish will do, in others a 2.4m dish is required!

link to this comment
satandpcguy's 89 posts ES
S
satandpcguy
sentiment_satisfiedBronze

7:35 AM

mark:
a few things to try
unplugging the box wait for 30 seconds and reboot it.
go to the menu system and reduced the time for "instant rewind" or turn it off altogether.
I only notice a slight delay when going to HD channels, maybe somethng to do with the amount of data HD channels use

link to this comment
satandpcguy's 89 posts ES
Friday, 14 January 2011
Daniel
7:01 PM

Any help with this would be greatly appreciated:

My sky keeps cutting out repeatedly, the picture jumps about and then "No Satellite Signal is being received" comes up, then it goes back to working fine for a few minutes and the whole things repeats again. Eventually it just won't show any picture at all (just the error 29 message). The picture might come back later on but sometimes it doesn't, no idea what to do, tried all three above methods. Thought it did work after the 3rd one, it worked perfectly for about 10mins but then it just cut out again.

Really stuck as to what could be causing this, any advice would be great thanks!

link to this comment
Daniel's 1 post GB
Les Nicol
sentiment_satisfiedGold

8:43 PM

Daniel - This could be (A) Suspect conection at either the receiver end or the LNB where water ingress in the cabling may be the problem. (B) Your dish requires re-configuration to peak the signal (C) Faulty PSU - power supply unit in the receiver. This applies particularly to Thomson boxes and some others where the capacitors are failing.

link to this comment
Les Nicol's 991 posts GB
Sunday, 16 January 2011
C
christine
3:05 PM

thanx a million

i was goin to av sky installed glad i saw this ..

ur a absolute star

link to this comment
christine's 1 post GB
Les Nicol
sentiment_satisfiedGold

4:52 PM

Christine - SKY receivers that are faulty will be repaired or replaced by SKY during the 12month intitial subscription period. Not all receivers (They are Manufactured by different suppliers.)- although they look alike are prone to PSU failure. I am aware of subscribers having receiver swop overs outside the initial contract period without a call out charge, but this seems discretionary usually when subscription termination is being muted by the subscriber.

link to this comment
Les Nicol's 991 posts GB
Les Nicol
sentiment_satisfiedGold

5:00 PM

P>S SKY also offer (It costs though) a scheme that covers equipment replacement receiver-LNB-cabling and I have known some that have benefitted from this.

link to this comment
Les Nicol's 991 posts GB
M
michelle
8:41 PM

hi ive just connected my sky hd to a new hd ready television model hitachi L42VCO4U B ive connected it using the HDMI lead. my previous tv used a scart. heres my problem the sky box searches for chanels doesnt find any and then says no signal. swithed on and off tried using scart leads followed your steps on searching for an up grade and tried method 2 but still no joy. i dont have an aeriel attatched to the property so could it be due to the television not being installed as that also says no signal. really thought it would work as my last tv to huge and ugly worked fine

link to this comment
michelle's 1 post GB
Select more comments

Your comment please
Please post a question, answer or commentUK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.







Privacy policy: UK Free Privacy policy.