menuMENU    UK Free TV logo Help!

 

 

Click to see updates

I have now lost all signal can you tell me what the problem might be?

I have now lost all signal can you tell me what the problem might be?

I have now lost all signal can you tell me what the problem mig
published on UK Free TV

The problem could be one of:

- the aerial has been moved or damaged;

- the cables or connectors that connect the digibox to the aerial are damaged;

- the digibox has broken.

If you have a "spare" digibox you use this to test the aerial connection. Can you still watch analogue TV OK?



All questions
BBC Three Linear channel re-opens1
Removing all barriers to communication between diverse cultures2
How do I get a test card with Freeview3
What can I do when my Sky Digibox says 'No Signal' or 'Technical fau4
Can I receive UK TV in Ghana?5
[][][
In this section
My Freeview box has no EPG, is blank on FIVE, ITV3, ITV4, ITV2+1, has no sound o1
I have a Durabrand cg5660-m and I need the lock key code!2
What is the Inversion Effect and why does it effect my Freeview TV reception? 3
My ITV/C4 Freeview channels have disappeared - what can I do? Is it my SCART ca4
My high gain aerial can't get all the Freeview channels I expected5
What are the aerial types about? Are they high-gain?6

Comments
Thursday, 3 December 2015
D
Dan
6:53 AM

Well I suspect something was wrong with the Pvr. I unplugged it completely and removed all aerial cables for at least 10 minutes and the set top box then worked fine. I plugged the Pvr back in and it then worked. I was reading the analog interference article that made me think to do this. I hope I'm posting in the right place as I can't find my original comment, Just wanted to give you an update as I know how annoying it is giving advice and not getting a response
Cheers, dan

link to this comment
Dan's 1 post GB
Tuesday, 8 December 2015
S
Steve Leah
7:57 PM

Hi
I have a Sense 42" Model No 51-42 which has been working off our Sky box and BT when I switched. I have now moved it in to another room without a sky box or BT so it is plugged into the normal aerial socket( which works as we had another television in there until yesterday working fine. I cannot find any channels when going through auto search it comes up with no signal on every channel I change to.
Any ideas what to do please.

link to this comment
Steve Leah's 1 post GB
J
js
sentiment_satisfiedGold

8:35 PM

Steve Leah: From google: "The Sense 51-42 LCD TV has ... built in DVB Freeview and analogue TV tuner."

You need to select Digital TV before scanning as Analogue TV is no longer transmitted.

A factory-reset or 'First Time Installation' may be appropriate.

link to this comment
js's 790 posts GB
Thursday, 17 December 2015
J
jayne
2:20 PM

My tv when i swich it on says scan on a blk screan and a bar moving up the tv saying 40%. 50%til it reach 100% then it goes bac to beg why

link to this comment
jayne's 1 post GB
J
jb38
sentiment_very_satisfiedPlatinum

6:51 PM

jayne: That said suggests that your TV carried out an auto-scan as soon as you switched it on, the percentage figures referred to indicating the progress of the tuner carrying out a rescan, the fact of it reverting back to the beginning again meaning that the tuner hasn't stored any channels. Of course that is "if" nothing is being received?, if not check your aerial connections, if though they are, then the auto-scan was most likely for purpose of channel updating.

Further advice as / if required.


link to this comment
jb38's 7,179 posts GB
Friday, 18 December 2015
P
Philip
6:10 PM

Have roof ariel running into a splitter then to 2 TV's in different rooms
One ariel works fine but other can't pick anything up
Have switched TV's and both work on the one coax
Have switched coax on splitters to no avail
Have replaced coax and connectors still no picture however other TV has great picture
Post code is ph73jt

link to this comment
Philip's 1 post GB
Saturday, 19 December 2015
MikeP
sentiment_very_satisfiedPlatinum

3:58 PM

Philip:

From what your state it seems as if the splitter might be the cause of the problem. Try a different one and check all the cables and connections.

link to this comment
MikeP's 3,056 posts GB
Monday, 28 December 2015
V
Val
1:35 PM

new sharp tv plugged into outdoor aerial thats works for old tv that was already there and working but says 'no signal'. Have tried selecting all choices for source and none of them pick up signal to let us tune tv in

link to this comment
Val's 2 posts GB
MikeP
sentiment_very_satisfiedPlatinum

3:36 PM

Val:

It is likely to be saying no signal because it has not yet been tuned to your loacl services. Set it to find Freeview Ddigital TV signals and then run the automatic tuning option.

link to this comment
MikeP's 3,056 posts GB
Tuesday, 29 December 2015
V
Val
10:49 AM

MikeP:
I've tried that.When i select Freeview it still says no signal and i cant get to the part where i can run automatic tuning :(

link to this comment
Val's 2 posts GB
Select more comments

Your comment please
Please post a question, answer or commentUK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.







Privacy policy: UK Free Privacy policy.